Your current region: International. Click to change to Europe.

RepRap Mendel Max 1.5 3D printer DIY KIT

3 reviews

3 reviews  |  Write a review

$599.00

Product Code: 1.5
Availability: In Stock

See what's inside Mendel Max

Click on the + icon to learn more about the chosen part.

Bipolar NEMA 17 Stepper Motors

For each RepRap Mendel MAX 1.5 DIY kit we include 5 motors, they are the driving force of each printer. The most important feature of each printer is their durability and reliability. Bipolar NEMA 17 Stepper Motors were created and manufactured to fulfill this task. They are both ideal as drive X, Y, Z and as an extruder motor!

Furthermore, they have four pin cables which enable to adjust them to your specific requirements. Our 3D printing experts have researched and found the best stepper motors specially for you.

×

Plastic Parts Set (optional)

It is a set of plastic parts designed and created specifically for your 3D printer - Mendel MAX 1.5. Parts were printed with a special material that provides the perfect combination of strength and flexibility. We own the great look high quality print. Orange color combined with black aluminum profiles makes our printer look amazing! Plastic Parts Set is an optional stuff that you can add it to your order for only €89!

×

LCD and SD Card (optional)

By purchasing our LCD panel with universal SD card slot you get the possibility to use your printer without a PC. Now, the only thing which you will need to start printing are g-codes stored on the SD card. The display screen will allow you to choose the right design, but also to see the level of printing progress or extruder temperature. You will be able to control the most important and the current information. Have the power to control the printing speed, extruder work, frequency of the motor steps, cooling settings or you can just pause the printing process during its work! It is easy to connect and very useful.

×

G3D Pre-assembled Hotend

Based on the Budaschnozzle 1.1 project this is the best Hotend construction on the 3D printers market! Although, to improve it even more we decided to make some modifications. Therefore, the wooden parts were replaced with more enduring, specialistic acrylic parts.

×

Frame Set

Black profiles included in the kit was made from high-grade aluminum, so that the structure is very light and looks stylish. In addition, the kit contains all the necessary elements of the framework such as: threaded and smooth rods, bearings, screws, nuts, washers etc.

×

G3D Cooling Plate and G3D Fan Splitter

Every electronic device needs proper cooling. With G3D Cooling Plate your RAMPS is safe from overheating. Stepper Drivers in your printer can work smoothly while outputting the maximum power. Currently, nobody offers this kind of solution. You will be able to avoid all the confusion related to your electronics overheating.

Moreover, G3D Fan Splitter is a perfect solution for people who want to upgrade their printer or increase its efficiency without the risk of overheating. G3D Fan Splitter has a series of inputs which allow to connect up to 15 cooler fans in order to effectively protect your printer from excessive heat. Additionally, instead of those cooler fans, you can plug in other equipment, such as LEDs or whatever else you want!

×

Heatbed MK2a PCB

Heatbed MK2a is currently the best construction of its kind on the market and it was proven by thousands of satisfied users. The maximum temperature which can be reached is 120°C and the device heats up from 0°C to 100°C in 5 minutes at a low voltage of 12V. Heatbed MK2 is indispensable when it comes to ABS printing but not only. Check it out yourself!

×

PLA Filament

PLA is the official build material for RepRap based printers and is compatible with all 3D printers on the market which use 1.75 mm filament. PLA is a bioplastic, meaning it is made from renewable natural resources. It is also biodegradable in commercial compost facility.

 

This is PLA4043D extruded into 1.75 mm filament. This is a wonderful build material. It has minimal warp when cooling. The pigments used in our color PLA are all bio-friendly and designed for use with PLA.

×

Ramps 1.4 Electronics with SD Ramps

RAMPS 1.4. is a failure-free and proven constructionwhich is even easier to assemble after we have implemented some modifications during the production process such as built-in SD card slot from with which you are able to print your projects without using the computer!

RAMPS Electronics and RAMPS 1.4. are already fully assembled and ready to use. NO DIY, just plug and play. Moreover, RAMPS 1.4. make it possible to install new useful elements like LCD screen, cooling plate and more. We have also foreseen the needs of more advanced users of 3D printing so that RAMPS 1.4 has the ability to support even 2 extruders.

The option of micro stepping gives you an extra tool to calibrate the speed and accuracy of printing. The set can be powered with voltages and current ranging from 12V-5 A to 20-11 A. Micro stepping is an optional feature which indicates the current status of the control unit or warns against hazards such as overheating.

×
+
+
+
+
+
+
+
+
+

Download the software and manual for your printer


What you will find in the package

  • View complete spec
    • Aluminiun Extrusion (Black)
    • 1x 100mm - 20*20*4.20mm
    • 4x 300mm - 20*20*4.20mm
    • 4x 340mm - 20*20*4.20mm
    • 6x 420mm - 20*20*4.20mm
    • X,Y,Z Axis
    • 2x Stainless Smooth Rod 405mm-10mm for Z axis
    • 2x Stainless Smooth Rod 420mm-8mm for Y axis
    • 2x Stainless Smooth Rod 445mm-8mm for X axis
    • 2x Stainless Threaded Rod 275mm-8mm for Z axis
    • 2x Stepper Motor NEMA 17 for Z axis
    • 1x Stepper Motor NEMA 17 for X axis
    • 1x Stepper Motor NEMA 17 for Y axis
    • 1x Stepper Motor NEMA 17 for extruder
    • 1x Aluminium board (black)
    • 2x Aluminium couplers
  • Screws, Nuts, Washers
    • 100x Screw M5x10
    • 2x Screw M5x12
    • 10x Screw M5x16
    • 5x Screw M5x20
    • 4x Screw M5x25
    • 12x Screw M4x10
    • 12x Screw M4x16
    • 8x Screw M3x8
    • 23x Screw M3x10
    • 12x Screw M3x16
    • 25x Screw M3x20
    • 2x Screw M3x30
    • 1x Screw M3x40
    • 4x Hedless screw
    • 100x T-SLOT Nut
    • 15x Nut M5
    • 4x Nut M4
    • 52x Nut M3
    • 4x Nut M8
    • 105x Waher M5
    • 49x Waher M3
    • 9x Waher M8
    • FEW Waher M4
      Bearings
    • 7x 608ZZ
    • 7x LM8UU
    • 4x LM10UU
    • 3x SCV8UU/SMA8 Bearing Housing
    • RepRap Heatbed MK2a PCB
    • 1x MK2a Heatbed PCB with soldered LEDs and Resistor
    • 1x NTC EPCOS type 100K Glass Thermistor
    • 1x Red and black wires Cable which can easily handle over 10A
    • 6x Spring
    • 1x Kapton Tape
    • G3D Pre-assembled Hotend
    • 1x Heater Block
    • 2x Nozzle (0,4mm/0,0157inch and 0,5mm/0,0196inch)
    • 1x Black Peek Isolator
    • 1x Aluminum extension
    • 1x Lower Plate
    • 1x Upper Plate
    • 1x Backup Plate
    • 1x Aluminium Heatsink
    • 1x Budaschnozzle Mount
    • 1x Ceramic Heater (40W/12-24V) with 1meter length cable
    • 1x EPCOS 100k thermistor with 1meter length cable (40')
    • 1x Fan Cooler
    • 1x White plumbing tape
    • 1x Hobbed Bolt
  • Ramps 1.4 COMPLETE SET
    • 1x Complete soldered Ramps 1.4
    • 5x A4988 complete soldered G3D Drivers with additional CLK trimpot
    • 1x Mega 2560
    • 1x Complete soldered SD ramps extension
    • 1x Cooler Fan
    • 6x 3 PIN cables for endstops
    • 3x 2 PIN cables for thermistors
    • 5x 4 PIN cables for motors
    • 2x EPCOS 100k Glass Thermistor
    • 1x Japanese Ceramic Screwdriver
    • 1x Power Supply 12VDC/30A
      3x Mechanical Endstops v1.2
      3x RepRap Style Endstops
      Cooling system
    • 1x G3D Fan Splitter
    • 1x G3D Cooling Plate
    • LCD and SD card LCD/SD panel with Ramps GADGETS3D Shield(Optional)
    • 1x Soldered and assembled panel with 4 row LCD, SD card connector, ALPS rotary encoder
    • 1x RAMPS GADGETS3D shield for easy panel connection into RAMPS 1.4.
    • 1x Kingston 4GB SD card
    • 1x Plastic Knob
    • 2x 10pin flat cable of 35cm length
  • Frame plastic parts
    • 2x Belts Closing
    • 1x Endstop Alu 20x20 Holder
    • 1x Endstop Holder - 8mm
    • 1x Endstop Holder - 10mm
    • 2x Lower Vertex Left Lower
    • 2x Lower Vertex Left Upper
    • 2x Lower Vertex Right Lower
    • 2x Lower Vertex Right Upper
    • 1x PSU Holder
    • 4x Top Vertex
    • 1x Wires Holder - Large
    • 1x Wires Holder - Medium
    • 1x Wires Holder - Small
    • 1x X Carriage Linear Bearing - 8mm Rod
    • 1x Y Idler Mount
    • 1x Y Idler Tensioner
    • 1x Y Motor Mount
    • 1x Y Rod Holder
    • 1x Z Belt Holder
    • 2x Z Lower Motor mount - 10mm
    • 2x Z Lower Motor Mount Support Left
    • 2x Z Lower Motor Mount Support Right
    • 1x Z Lower Motor Mount Support Right
    • 1x Z Motor Holder Lower
    • 4x Z Rod Clasp - 10mm
    • 2x Z Top Vertex - 10mm
      Extruder plastic parts
    • 1x Duct
    • 1x Extruder Part 1
    • 1x Extruder Part 2
    • 1x Gear 1
    • 1x Gear 2

What it is?

MendelMax 1.5 is an open-source RepRap 3D printer designed by Kludingeer. Its construction was strongly modernized by changing threaded rods to aluminum profiles. This is how a printer with an extremely stable construction was created. Machine is also very easy to install – ideal for those who want to start their adventure with 3D printing at low cost. An additional advantage of Mendel Max 1.5 is the possibility of introducing next modifications in the spirit of open-source. This is a great advantage for home-grown inventors and professional printers. The issues of aesthetics didn’t remain indifferent for the designers. The machine looks sleek and elegance, fit perfectly in all kind of interiors. Mendel Max 1.5 works using two currently most popular types of filament: PLA and ABS. That gives the possibility to fit material features to print exact type of project. This version allows to print items with maximum dimensions of 185 mm x 185 mm x 180 mm. Perfect for medium-size as well as small size creations; always keeping the same accuracy of the details.

Why Mendel MAX?

It is currently the best Rep Raps machine on the market. Evidence of this is the popularity in Europe, the United States, Asia and South America it gained thanks to its compatibility. All of the parts used in the classical Rep Raps are suitable for MendelMax 1.5. What's more, unlike the previous machines, installation or replacement of parts is extremely easy and doesn’t take more than 3 minutes!

Why from us?

Gadgets3D Online Store was created for all users interested in 3D printing. Our main goal is to provide high-quality equipment and materials needed for building your own 3D printer. By partnering with large factories and suppliers we can offer you our products in affordable prices. We have hundreds of satisfied users and resellers from more than 30 countries in the world. Gadgets3D is located in Poland and HongKong.

Technical Parameters

Information Parameters
Print Area Dimensions 200 mm x 200 mm x 160 mm
Print Volume 6500 cm3
Printer Dimensions 520mm x 520mm x 420mm
Supported Filament ABS, PLA, Nylon, PVA and Laywoo-D3 and others thermoplastics
Usable Maximum Print Speed 3000 mm/min
Usable Maximum Movement Speed 12000 mm/min
Layer Height 100 - 400 micron
X & Y Axis Resolution 0.0125 mm (12.5 Micron)
Power Requirements Switchable AC-DC adapter 110-230VAC to 0-25 VDC
Hotend G3D HotEnd v1.2 pre-assembled with 1.75-3mm filament support
Electronics Complete soldered RAMPS 1.4 with 4x A4988 G3D Drivers with dual extruder support

What You Will Find in Your Package

ELECTRONICS QTY
Ramps 1.4 COMPLETE SET  
Complete soldered Ramps 1.41
A4988 complete soldered G3D Drivers with additional CLK trimpot 5
Mega 25601
Complete soldered SD ramps extension1
Cooler Fan1
6x 3 PIN cables for endstops1
3x 2 PIN cables for thermistors1
5x 4 PIN cables for motors1
EPCOS 100k Glass Thermistor2
Japanese Ceramic Screwdriver1
LCD and SD card LCD/SD panel with Ramps GADGETS3D Shield(Optional)
soldered and assembled panel with 4 row LCD, SD card connector, ALPS rotary encoder1
RAMPS GADGETS3D shield for easy panel connection into RAMPS 1.4.1
Kingston 4GB SD card1
Plastic Knob1
10pin flat cable of 35cm length2
Power supply  
Power Supply 12VDC/30A1
Mechanical Endstop Set  
Mechanical Endstops v1.23
Endstop Set RepRap style  
RepRap Style Endstops3
Cooling system  
G3D Cooling Plate1
G3D Fan Splitter1
G3D Cooling Plate1
Printing platform & Extruder parts  
RepRap Heatbed MK2a PCB  
MK2a Heatbed PCB with soldered LEDs and Resistor1
NTC EPCOS type 100K Glass Thermistor 1
Red and black wires Cable which can easily handle over 10A1
Spring6
Kapton Tape1
G3D Pre-assembled Hotend  
Heater Block1
Nozzle (0,4mm/0,0157inch and 0,5mm/0,0196inch)2
Black Peek Isolator1
Aluminum extension1
Lower Plate1
Upper Plate1
Backup Plate1
Aluminium Heatsink1
Budaschnozzle Mount1
Ceramic Heater (40W/12-24V) with 1meter length cable1
EPCOS 100k thermistor with 1meter length cable (40')1
Fan Cooler 1
white plumbing tape 1
Hobbed Bolt  1
FRAME SET  
Aluminiun Extrusion (Black)  
100mm - 20*20*4.20mm1
300mm - 20*20*4.20mm4
340mm - 20*20*4.20mm4
420mm - 20*20*4.20mm6
X,Y,Z Axis  
Stainless Smooth Rod 405mm-10mm for Z axis2
Stainless Smooth Rod 420mm-8mm for Y axis2
Stainless Smooth Rod 445mm-8mm for X axis2
Stainless Threaded Rod 275mm-8mm for Z axis2
Stepper Motor NEMA 17 for Z axis2
Stepper Motor NEMA 17 for X axis1
Stepper Motor NEMA 17 for Y axis1
Stepper Motor NEMA 17 for extruder1
Aluminium board (black)1
Aluminium couplers 2
Screws, Nuts, Washers  
Screw M5x10100
Screw M5x122
Screw M5x1610
Screw M5x205
Screw M5x254
Screw M4x1012
Screw M4x1612
Screw M3x88
Screw M3x1023
Screw M3x1612
Screw M3x2025
Screw M3x302
Screw M3x401
Hedless screw4
T-SLOT Nut100
Nut M515
Nut M44
Nut M352
Nut M84
Waher M5105
Waher M349
Waher M89
Waher M4FEW
Bearings  
608ZZ7
LM8UU7
LM10UU4
SCV8UU/SMA8 Bearing Housing3
Plastic Parts Set (optional)  
Frame plastic parts  
Belts Closing2
Endstop Alu 20x20 Holder1
Endstop Holder - 8mm1
Endstop Holder - 10mm1
Lower Vertex Left Lower2
Lower Vertex Left Upper2
Lower Vertex Right Lower2
Lower Vertex Right Upper2
PSU Holder1
Top Vertex4
Wires Holder - Large1
Wires Holder - Medium1
Wires Holder - Small1
"X Carriage Linear Bearing - 8mm Rod"1
Y Idler Mount1
Y Idler Tensioner1
Y Motor Mount1
Y Rod Holder1
Z Belt Holder1
"Z Lower Motor mount - 10mm"2
"Z Lower Motor Mount Support Left"2
"Z Lower Motor Mount Support Right"2
"Z Lower Motor Mount Support Right"1
Z Motor Holder Lower1
Z Rod Clasp - 10mm4
Z Top Vertex - 10mm2
Extruder plastic parts  
Duct1
Extruder Part 11
Extruder Part 21
Gear 11
Gear 21

** Technical support includes providing a complete kit to build a 3D printer that contains complete build manual

*** All information related to the calibration of the printer are in the knowledge base RepRap community:

http://reprap.org/wiki/RepRap

http://forums.reprap.org/

**** We do not support in terms of modifications to the printer, software configuration, due to the fact that we are not the authors of the software. Recommended software for the printer are:

Repetier host: http://slic3r.org/

Slic3r: http://slic3r.org/

Write a review

Note: HTML is not translated!


Rating: Bad           Good


Please choose your location

Specify your location in order to minimize shipping costs and choose the right currency.

Europe Worldwide ×